top of page

Building and Pest Inspection: A Smart Step Towards a Safer Property Purchase

Writer: Joseph Webb
Joseph Webb
21 hours ago
6 min read

Say you've found the one. Three bedrooms, a leafy street, fresh paint in every room. You've already decided where the sofa goes. Then, a month after settlement, a patch of damp shows up behind the wardrobe and the back deck feels a bit too springy underfoot.


That's the sort of surprise a building and pest inspection is meant to catch before you sign. It won't make a house perfect. It will tell you what you're really buying.


Here's how the process works, what it does and doesn't cover, and how to get the most out of the report.


Inspector with a torch and tablet carrying out a building and pest inspection inside a home

What Is a Building and Pest Inspection, Really?


Think of it as a health check for a house. A qualified person goes through the property and writes up what they find. CommBank describes it as an assessment of a property's condition before purchase, and says it can reveal defects that aren't obvious, such as rising damp, structural cracks and faulty roofs.


The word that matters is visual. Australian Standard AS 4349.1-2007 sets out recommendations for visually inspecting residential buildings and for preparing the report. So the inspector looks, measures and probes where they safely can. They don't pull your walls apart.


Most buyers book the two checks together. CommBank notes that many inspectors offer a combined service that costs less than two separate visits. It still pays to understand that you're getting two different jobs.


The building side


For a pre-purchase building inspection in Queensland, the building regulator (QBCC) says the inspector looks for obvious defects and areas of concern. Its examples include roof faults, cracked walls, damaged foundations, mould, a lack of waterproofing and drainage issues. They'll also point out possible asbestos, and QBCC says most homes built before 1990 contain some.


Got a specific worry, like a sagging roofline? QBCC suggests getting a more detailed report from the right expert, such as a plumber or engineer. A general inspector flags it. A specialist digs in.


The pest side


A pest inspection looks for termites, any damage they've caused and any existing termite management system. QBCC says the inspector should also explain how to maintain that system and whether the property sits in a termite-risk area.


One catch. A report may show visible termite damage without proving the termites are still around. NSW Fair Trading's buying guide makes the same point, and it advises getting a pest report as well as a building report. My blunt take: skip the pest check on an older timber home and you're gambling.


What Happens on Inspection Day?


Turn up. Seriously. If you can attend, do. QBCC encourages buyers to be there, understand what is and isn't covered, and ask questions as the inspector works.


A typical building and pest inspection walks through the inside and outside of the property, plus any areas the inspector can safely reach. The building inspector looks for the kinds of defects listed above. The pest inspector checks for termites and signs of past damage. Both write up what they saw and, just as importantly, what they couldn't see.


Say you're buying a 1980s brick home. Expect the report to mention possible asbestos, because QBCC says most homes built before 1990 contain some. That's not a reason to panic. It's a reason to ask the inspector what it means for any renovation plans, and to talk to a specialist before you start knocking walls down.


Bring a notepad. Ask what worries them most, and what they'd fix first. Inspectors tend to give straighter answers face to face than a report ever does.


What a Building and Pest Inspection Won't Tell You


Reports aren't magic. They have limits, and good inspectors write those limits down.


QBCC puts it plainly: a pre-purchase building inspection is not a warranty against future defects. Anything the inspector couldn't see, or couldn't reach, isn't covered either. CommBank adds that inspectors normally don't check plumbing, electrical wiring, appliances or paint, and that reports generally don't estimate repair costs.


So picture a lounge room with a stained ceiling. The report flags a likely roof or plumbing fault. It probably won't tell you the repair is $800 or $8,000. You'd need quotes, or a specialist, to find out.


Read the scope section first. It's the dullest page in the report and the one that explains everything else.


When Should You Book One?


Before you're locked in. QBCC tells buyers to get both inspections before finalising the purchase and to make the contract conditional on being satisfied with the results. CommBank says the ideal time is before exchanging contracts or during the cooling-off period.


That's where the rules start to differ. NSW Fair Trading's guide says that after exchange you usually have five business days to withdraw, though the owner may keep 0.25% of the agreed price if you do. A seller can agree to waive, shorten or extend that period. And there's no cooling-off period at auction, even if the property is passed in and contracts are exchanged the same day.


Rules vary by state and territory, so check yours. But the practical lesson holds everywhere. If you're bidding at auction, a building and pest inspection has to happen before auction day, not after. That's the one I'd never skip.


Wait, what if the seller won't give you time? Then you've learned something about the sale, too.


How to Choose an Inspector


Anyone can print a report. Not everyone can write a reliable one.


QBCC says building inspections must be done by a licensed residential building inspector, and termite inspections by a licensed pest controller. A combined job is fine if the person holds both licences. Licensing rules differ between states, so check your own state or territory's Fair Trading or building regulator before you hire.


CommBank suggests using a licensed builder, surveyor or architect with adequate insurance, particularly professional indemnity insurance.


Then run through this list:


  1. Ask to see the licence and confirm it with the regulator.

  2. Check the insurance, including professional indemnity.

  3. Ask which Australian Standard the report follows.

  4. Request a sample report so you know what you'll receive.

  5. Find out how soon you'll have the report in your hands.

  6. Plan to attend the inspection yourself.


That last one gets overlooked. QBCC encourages buyers to attend, understand what is and isn't covered, and ask questions. Standing in the roof space with the inspector teaches you more than the PDF ever will.


Reading the Report Without Panicking


Almost every report finds something. Old houses have quirks. New houses have defects too, so a clean-looking report on a brand-new place deserves a careful read, not a quick skim.


Sort the findings into three buckets in your head. Safety or structural problems come first. Then moisture, termite and roof issues, which can get worse fast. Everything else, like worn fittings and minor cracks, is maintenance.


Then use it. CommBank points out that a report can support a price negotiation if repairs are needed. Say the report shows a damaged section of roof plumbing and a patch of rot near the back door. Get a couple of quotes, then ask the seller to adjust the price or fix the problems before settlement.


CommBank's view is that finding problems early could save significant money later. That's a fair way to think about the building and pest inspection fee. You're paying for information, and information is cheaper before settlement than after it. Compare that with a repair bill you didn't see coming.


And if the report makes you uneasy about the whole property? Walking away is a legitimate result. It's why you paid for the thing.


Mistakes Buyers Make


Most regrets after a building and pest inspection come from a short list.


  • Booking the inspection after contracts are already exchanged

  • Hiring on price alone

  • Skipping the pest side on an older home

  • Never reading the limitations page

  • Treating the report like a warranty


Avoid those five and you're ahead of plenty of buyers. Most of them come down to the same root problem: treating the inspection as a box to tick instead of a chance to learn something.


FAQs About Building and Pest Inspections


Do I need both a building and a pest inspection?


Usually, yes. A building report may show visible termite damage but typically can't tell you whether termites are still active, which is why NSW Fair Trading advises a pest report as well.


How much does a building and pest inspection cost?


CommBank says inspections cost in the hundreds of dollars, and that a combined service often costs less than two separate ones. Exact prices depend on the property's size, location and age, so get a quote before you book.


Can an inspection guarantee a house is problem-free?


No. It's a snapshot of what the inspector could see on the day, not a warranty against future defects. Parts of the property that couldn't be reached or inspected aren't covered. Treat the report as a strong guide, then follow up on anything that worries you with the right specialist.


Bottom Line


A building and pest inspection won't guarantee a trouble-free home. It will show you the visible problems, raise the right questions and give you leverage if repairs are needed. Book it before you're committed, choose a licensed inspector, read the limits and ask questions on the day. When you're ready, book an inspection and buy with your eyes open.

Comments


bottom of page